Nokia Advanced Car Kit CK-7W User Guide - Page 10

Installation of the system. If you have any concerns, contact your car dealer before any installation work is done. • Do not wire Advanced Car Kit equipment to the highvoltage lines of the ignition system. • All equipment must be mounted so that it does not interfere with the operation of the vehicle. • Your service technician may be able to provide you with information on alternatives for mounting the equipment suitably in your vehicle without requiring boreholes. • The mount for the phone holder is to be fixed to the dashboard or to any other location in the cockpit area where the display is clearly visible for the user but does not impair control or operation of the vehicle. The keypad should be within easy reach of the driver. • Make sure not to impact the steering or braking systems or other key systems essential for proper operation of the car when installing Advanced Car Kit equipment. Check to make sure that deployment of the airbag is not blocked or impaired in any way. • Do not smoke when working on the car. Make sure that there is no source of fire or flame nearby. • Take care not to cause damage to electrical cables, fuel or brake lines or safety equipment during installation work. • RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid braking systems, electronic speed control systems, airbag systems). Should you note a fault or change in the operation of such a system, contact your car dealer. • Ensure that cables are placed so that they will not be subjected to mechanical wear and tear (e.g. not laid under car seats or over sharp edges). 10