Nokia BH 102 User Guide - Page 5

Switch on or off, Pair the headset - tri

Page 5 highlights

charging. Charging the battery fully may take up to 2 hours. 3. When the battery is fully charged, the indicator light turns off. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 10 hours of talk time or up to 250 hours of standby time. When battery power is low, the headset beeps once every minute and the indicator light flashes quickly. Switch on or off To switch on, press and hold the multifunction key for about 2 to 4 seconds. The headset beeps, and the indicator light is displayed. The headset tries to connect to a paired device. To switch off, press and hold the multifunction key for about 4 to 8 seconds. Pair the headset 1. Ensure that your phone is switched on and the headset is switched off. 2. Press and hold the multifunction key (for about 4 to 8 seconds) until the indicator light starts to flash quickly. 3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. 4. Select the headset from the list of found devices. 5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones, you may need to make the © 2008 Nokia. All rights reserved. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

© 2008 Nokia. All rights reserved.
5
charging. Charging the battery
fully may take up to 2 hours.
3.
When the battery is fully
charged, the indicator light
turns off. Disconnect the
charger from the headset and
the wall outlet.
The fully charged battery has
power for up to 10 hours of talk
time or up to 250 hours of standby
time.
When battery power is low, the
headset beeps once every minute
and the indicator light flashes
quickly.
Switch on or off
To switch on, press and hold the
multifunction key for about 2 to 4
seconds. The headset beeps, and
the indicator light is displayed. The
headset tries to connect to a
paired device.
To switch off, press and hold the
multifunction key for about 4 to 8
seconds.
Pair the headset
1.
Ensure that your phone is
switched on and the headset is
switched off.
2.
Press and hold the
multifunction key (for about 4
to 8 seconds) until the
indicator light starts to flash
quickly.
3.
Activate the Bluetooth feature
on the phone, and set the
phone to search for Bluetooth
devices.
4.
Select the headset from the list
of found devices.
5.
Enter the passcode
0000
to
pair and connect the headset to
your phone. In some phones,
you may need to make the