Nokia BH-215 User Guide - Page 6

Switch on or off, Pair the headset, Ensure that your phone is - passcode for

Page 6 highlights

battery fully may take up to 2 hours. 3. When the battery is fully charged, the green indicator light is displayed. Disconnect the charger from the headset, then from the wall outlet. The fully charged battery has power for up to 10 hours of talk time or up to 200 hours of standby time. When the battery is discharged, the headset beeps every minute and the red indicator light flashes. Switch on or off To switch on, press and hold the power key for about 2 seconds. The headset beeps, and the green indicator light is displayed. The headset tries to connect to a paired phone. To switch off, press and hold the power key for about 5 seconds. The headset beeps, and the red indicator light is briefly displayed. If the headset is not connected to a device within about 30 minutes, it switches off automatically. Pair the headset 1. Ensure that your phone is on and the headset is off. 2. Press and hold the power key (for about 5 seconds) until the green indicator light starts to flash quickly. 3. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. 4. Select the headset from the list of found devices. 5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones, 6 © 2008 Nokia. All rights reserved.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

6
© 2008 Nokia. All rights reserved.
battery fully may take up to 2
hours.
3.
When the battery is fully
charged, the green indicator
light is displayed. Disconnect
the charger from the headset,
then from the wall outlet.
The fully charged battery has
power for up to 10 hours of talk
time or up to 200 hours of standby
time.
When the battery is discharged,
the headset beeps every minute
and the red indicator light flashes.
Switch on or off
To switch on, press and hold the
power key for about 2 seconds. The
headset beeps, and the green
indicator light is displayed. The
headset tries to connect to a
paired phone.
To switch off, press and hold the
power key for about 5 seconds. The
headset beeps, and the red
indicator light is briefly displayed.
If the headset is not connected to
a device within about 30 minutes,
it switches off automatically.
Pair the headset
1.
Ensure that your phone is on
and the headset is off.
2.
Press and hold the power key
(for about 5 seconds) until the
green indicator light starts to
flash quickly.
3.
Activate the Bluetooth feature
on the phone, and set it to
search for Bluetooth devices.
4.
Select the headset from the list
of found devices.
5.
Enter the passcode
0000
to
pair and connect the headset to
your phone. In some phones,