Nokia BH-215 User Guide - Page 8

Turn vibration on or off, Clear settings or reset, volume down key for about 2 - user guide

Page 8 highlights

progress, press and hold the answer/end key for about 2 seconds. Proceed as described in the phone user guide. To answer or end a call, press the answer/end key. To reject a call, press this key twice. To adjust the volume, press the volume up or down key. To mute the microphone, slide the mute key towards the earpiece (14). To unmute the microphone, slide the mute key away from the earpiece. To switch a call from the headset to a compatible phone, press and hold the answer/end key for about 2 seconds, or switch off the headset. To switch the call back to the headset, press and hold the answer/end key for about 2 seconds, or switch on the headset. Turn vibration on or off You can set the headset to vibrate when you receive a call. By default, the vibration is on. To turn the vibration off, press and hold the power key and the volume down key for about 2 seconds. To turn the vibration back on, switch on the headset, and press and hold the power key and the volume up key for about 2 seconds. Clear settings or reset To delete the pairings from the headset, press and hold the power key and the answer/end key (for about 5 seconds) until the red and green indicator lights start to alternate. To reset the headset if it stops functioning, even though it is charged, connect the headset to a 8 © 2008 Nokia. All rights reserved.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

8
© 2008 Nokia. All rights reserved.
progress, press and hold the
answer/end key for about 2
seconds. Proceed as described in
the phone user guide.
To answer or end a call, press the
answer/end key. To reject a call,
press this key twice.
To adjust the volume, press the
volume up or down key.
To mute the microphone, slide the
mute key towards the earpiece
(14). To unmute the microphone,
slide the mute key away from the
earpiece.
To switch a call from the headset
to a compatible phone, press and
hold the answer/end key for about
2 seconds, or switch off the
headset. To switch the call back to
the headset, press and hold the
answer/end key for about 2
seconds, or switch on the headset.
Turn vibration on or off
You can set the headset to vibrate
when you receive a call.
By default, the vibration is on. To
turn the vibration off, press and
hold the power key and the
volume down key for about 2
seconds. To turn the vibration back
on, switch on the headset, and
press and hold the power key and
the volume up key for about 2
seconds.
Clear settings or reset
To delete the pairings from the
headset, press and hold the power
key and the answer/end key (for
about 5 seconds) until the red and
green indicator lights start to
alternate.
To reset the headset if it stops
functioning, even though it is
charged, connect the headset to a