Nokia DT-1 User Guide - Page 22
Changing the covers, used in the paper must not contain metal particles.
UPC - 760492003162
View all Nokia DT-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6. To replace the back cover: Place the top of the back cover over the top of the phone (10). Press the bottom of the back cover towards the phone until the cover is locked into place (11). ■ Changing the covers Before changing the cover, always switch off the power and disconnect the phone from the charger or any other device. Avoid touching electronic components while changing the covers. Always store and use the phone with the covers attached. The phone is supplied with some cut-out covers made and approved by Nokia that you can use to quickly change the look of your phone. You can also make the covers by yourself. Note: Use only normal, plain paper used in standard printers (whose weight is 60-135 g/m2) that is not thicker than 0.3 mm. Colors or ink used in the paper must not contain metal particles. 1. Remove the back cover as described on page 20. 2. To remove the front cover, gently pull the top of the cover from the phone (1) and lift the cover. 3. Remove the old cut-out cover from the back cover and the old cut-out cover and keymat from the front cover. Copyright © 2004 Nokia. All rights reserved. 22