Nokia NBB0150000 Installation Guide - Page 32
Connecting Power and Turning the Power
View all Nokia NBB0150000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4 9600 bps 8 data bits No parity 1 stop bit To connect to the console 1. Connect the supplied null-modem cable (console cable) to the console port on the front panel of the IP150 appliance. If you connect the console port to a data communications equipment (DCE) device, use a straight-through cable. POWER STATUS FAULT AUX CONSOLE 1 2 3 4 IP150 00662 Console port For cable pin assignments for the console connection, see Figure 4 on page 17. 2. Connect the other end of the cable to the VT100 console or to a system running a terminal-emulation program. Connecting Power and Turning the Power On A power switch and a receptacle for the power cord are located on each power supply on the back of the appliance as shown in Figure 10. Figure 10 Power Switch Location Power plug 00663 Power switch 32 Nokia IP150 Security Platform Installation Guide