Nokia SU-27W User Guide - Page 7
Charge from a wall outlet, While the battery is charging, the battery indicator slowly flashes - digital pen
View all Nokia SU-27W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting started 2. Switch on the PC, and plug the USB connector of the cradle to the USB port on the PC. 3. To start charging, remove the pen cap, and insert the pen into the USB cradle so that the connectors on the pen are facing the connectors on the cradle. If you use a laptop PC that is not plugged into a wall outlet, charging the pen battery from the PC increases the demand on the PC battery and reduces battery life. When you connect the cradle to your PC for the first time and the PC is running the Microsoft Windows XP or 2000 operating system, the pen is detected as new hardware and you are asked whether you want to install the digital pen drivers. If you want to only charge the pen battery and do not intend to transfer data from the pen to the PC, you do not need to install the pen drivers, and you can exit the dialog box. While the battery is charging, the battery indicator slowly flashes red, yellow, or green depending on the charge level of the battery. 4. When the battery is fully charged, the battery indicator turns solid green. Remove the pen from the cradle by lifting it, or unplug the USB connector from the PC. Charge from a wall outlet To charge the pen from a wall outlet, do the following: 1. Open the USB cradle, and place it on a flat surface. 2. Remove the pen cap, and insert the pen into the USB cradle so that the connectors on the pen are facing the connectors on the cradle. 7