Nokia Wireless Audio Gateway AD-42W User Guide - Page 5
Switch the gateway on or off, Pair the gateway
View all Nokia Wireless Audio Gateway AD-42W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Switch the gateway on or off ENGLISH To switch on, plug the charger cable into the power connector at the back, and connect the charger to a wall outlet. When the gateway is connected to a paired audio device and is ready for use, the indicator light flashes slowly. The gateway tries to connect to the Bluetooth device that you have used most recently in the current operating mode. For more information on the two operating modes, see "Pair the gateway". To switch off, unplug the charger from the wall outlet and the gateway. Pair the gateway Before you can use the gateway with a compatible audio device that supports Bluetooth wireless technology, you need to pair the gateway with it. To pair the gateway with a music player (such as a music player device or a mobile phone with a music player feature), do as follows: 1. Check that the operating mode key is in the down position. If it is not, press the key. 2. Press and hold the pairing key until the indicator light is continuously shown. 3. Use your music player or phone to search for and select the gateway and to enter the Bluetooth passcode 0000. If the pairing was successful, the indicator light flashes quickly 10 times. To pair the gateway with a headset, do as follows: 1. Check that the operating mode key is in the up position. If it is not, press the key. 2. Set up the headset for pairing as instructed in the user guide for the headset.