Nokia Wireless Audio Gateway AD-42W User Guide - Page 6

ENGLISH 3. Press and hold the pairing key until the indicator light is continuously shown. The gateway is paired automatically with the headset. If the headset requires a Bluetooth passcode and the default passcode of the headset is not 0000, change the passcode to 0000 as instructed in the user guide of the headset. You can pair the gateway with up to eight Bluetooth devices but connect it to only one device at a time in both operating modes. To change the Bluetooth audio device (such as a music player or headset) that you have connected to the gateway, disconnect the current device from the gateway and connect another paired device to it. For details, see the user guides of your audio devices. If you want to clear the list of paired devices, press and hold the pairing key for 15 seconds while you are not listening to music through the gateway. Connect the gateway Ensure that the home stereo system is switched off before making any connections to it. To play music on your paired music player through a home stereo system, plug the supplied RCA cables to the audio outputs on the gateway and to the audio inputs on your stereo system. To play music on your home stereo system through a paired headset, plug the RCA cables to the audio inputs on the gateway and to the audio outputs on your stereo system. After you have connected the gateway to your home stereo system, set the volume at a moderate level on the music player or headset and the stereo system, and start to play music on the music player or stereo system. If you have paired and connected the gateway with a music player and a headset, to switch between the two connections, press the operating mode