NordicTrack 13 King Hybrid Mattress - Firm Includes 2 Sensors English Manual - Page 6

Install The iFit Sleep App And Pair The Sensor To The App IMPORTANT: If your model includes one sensor, follow the instructions below. If your model includes two sensors, see page 5. Install the iFit Sleep App and Pair the Sensor to the App To use the NORDICTRACK Sleep Coach, you must have an iOS device (iPhone® 4s and later) or an Android device (Android 5.0 and later) that supports BLUETOOTH 4.0 wireless technology. Visit the App Store℠ or the Google Play™ store, do a search for the free iFit Sleep app, and install the app on your device. Next, open the app and touch Join to create an iFit account (or touch Log In to log in to your existing iFit account). Then, follow the instructions in the app to set up the sensor and to pair and sync the sensor to the app. Following is a summary of the procedure: 1. Plug the small end of the power cord fully into the power port on the sensor. 2. Make sure that the power cord is plugged fully into the power adapter. Then, plug the power adapter into an appropriate outlet that is close to your bed. The green indicator on the sensor will light. 3. Make sure that BLUETOOTH is enabled on your device. Hold your device close to the sensor, and touch Set Sensor in the iFit Sleep app. After several seconds, the sensor will pair with the app. The blue indicator on the sensor will light. Note: The sensor can track only one person. 4. See POSITION THE SENSOR on page 6. 4