NordicTrack 19.0 Treadmill Uk Manual - Page 11

9. Remove the tie from the upper end of the Storage Latch (87). Attach the upper end of the 9 Storage Latch to the bracket on the Frame (67) with a 3/8" x 1 3/4" Bolt (3) and a 3/8" Jam Nut (7). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the bracket. Lower the Frame (67) (see HOW TO LOWER THE TREADMILL FOR USE on page 27). 67 7 Latch Knob 3 87 Large Barrel 10. With the help of a second person, raise the front of the treadmill and insert the crossbar on 10 the Base (103) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill to prevent it from moving forward or backward. Firmly tighten the four 3/8" x 3 3/4" Screws (5). With the help of the second person, lower the treadmill off the cardboard stand. 5 103 5 Cardboard Stand 11. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 29 and 30). To protect the floor or carpet from damage, place a mat under the treadmill. Extra hardware may be included. 11