NordicTrack 2150 Treadmill English Manual - Page 24

12. Set a safety screen timeout. The console features an automatic screen reset; if no buttons are touched or pressed and the walking belt does not move for a set amount of time, the console will automatically reset. To set the amount of time the console will wait before it automatically resets, touch the Safety Screen Timeout button to view a list of times. Then, select the amount of time desired. Touch the back button on the screen. The screen will show the progress of the update. When the update is complete, the treadmill will turn off and then turn back on. If it does not, press the power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use. Note: Occasionally, a firmware update may cause your console to function slightly differently. These updates are always designed to improve your exercise experience. 13. Exit the equipment settings mode. 4. Calibrate the incline system of the treadmill.  To exit the equipment settings mode, touch the back button on the screen. HOW TO USE THE MAINTENANCE MODE 1. Select the settings main menu. See step 1 on page 23. Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline system. The treadmill will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. Press the Cancel button to return to the maintenance mode. When the incline system is calibrated, touch the Finish button. 2. Select the maintenance mode. In the settings main menu, touch the Maintenance button to enter the maintenance mode. IMPORTANT: Keep pets, feet, and other objects away from the treadmill while the incline system is calibrating. In an emergency, pull the key from the console to stop the incline calibration. The maintenance mode main screen will show information about the model and version of the treadmill. 3. Update the console firmware. For the best results, regularly check for firmware updates. Touch the Firmware Update button to check for firmware updates using your wireless network. The update will begin automatically. 5. View machine information. Touch the Machine Info button to view information about your treadmill. After you view the information, touch the back button on the screen. 6. Find keycodes. The Keycodes button is intended to be used by service technicians to identify whether a certain button is working correctly. 7. Exit the maintenance mode. To exit the maintenance mode, touch the back button on the screen. To avoid damaging the treadmill, do not turn off the power or remove the key while the firmware is being updated. 24