NordicTrack 2450 Instruction Manual - Page 10
start all four Screws, and then, tighten them., start, all four Truss Head Screws, and then tighten
 |
View all NordicTrack 2450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6. Carefully slide the Upright Crossbar (76) between the Right and Left Uprights (84, 91). 6 Attach the Upright Crossbar with four 5/16" x 3/4" Screws (1); start all four Screws, and then tighten them. 76 1 84 1 91 7. Hold the Tray (79) near the Right Upright (84). Next, locate the tie (F) in the indicated hole (G) 7 in the Right Upright. Wrap the tie around the H 79 end of the fan wire (H), and pull the fan wire into the hole and out of the top of the Right Upright. Then, remove the tie. Attach the Tray (79) to the Upright Crossbar (76) G with four #8 x 3/4" Truss Head Screws (7); start all four Truss Head Screws, and then tighten them. F 7 76 7 84 10
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
10
6.
Carefully slide the Upright Crossbar (76)
between the Right and Left Uprights (84, 91).
Attach the Upright Crossbar with four 5/16" x
3/4" Screws (1);
start all four Screws, and then
tighten them.
6
91
1
76
84
1
7.
Hold the Tray (79) near the Right Upright (84).
Next, locate the tie (F) in the indicated hole (G)
in the
Right Upright. Wrap the tie around the
end of the fan wire (H), and pull the fan wire into
the hole and out of the top of the Right Upright.
Then, remove the tie.
Attach the Tray (79) to the Upright Crossbar (76)
with four #8 x 3/4" Truss Head Screws (7);
start
all four Truss Head Screws, and then tighten
them.
7
7
84
F
H
76
7
79
G