NordicTrack 2450 Instruction Manual - Page 11
Upright Coaxial Cable 128, the Upright Wire
View all NordicTrack 2450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. Attach the two Handrails (74) to the Right and Left Uprights (84, 91) with two of the 5/16" x 2" Screws (2) that you removed in step 5 and two 5/16" Star Washers (8); do not fully tighten the Screws yet. Be careful not to pinch the Upright Coaxial Cable (128), the Upright Wire (83), or the fan wire (H). Position the wires as shown. Then, remove and discard the two indicated screws (I). 8 2 8 I 74 128 91 2 74 H 83 8 I 84 9. Set the console assembly (J) face down on a soft surface to avoid scratching the console 9 assembly. Remove and discard the four indicated screws (K). Then, remove the Pulse Crossbar (80). J K 80 K 11
11
8.
Attach the two Handrails (74) to the Right and
Left Uprights (84, 91) with two of the 5/16" x 2"
Screws (2) that you removed in step 5 and two
5/16" Star Washers (8);
do not fully tighten
the Screws yet. Be careful not to pinch the
Upright Coaxial Cable (128), the Upright Wire
(83), or the fan wire (H). Position the wires as
shown.
Then, remove and discard the two indicated
screws (I).
I
128
91
74
8
9.
Set the console assembly (J) face down on a
soft surface to avoid scratching the console
assembly.
Remove and discard the four indicated
screws (K). Then, remove the Pulse
Crossbar (80).
J
80
K
9
K
8
2
H
I
83
74
8
2
84