NordicTrack 3000r Treadmill English Manual - Page 9
ceiver so the small cylinder is oriented as shown
View all NordicTrack 3000r Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
If you purchase the optional chest pulse sensor (see page 26), follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the key is removed from the console and the power cord is unplugged. Remove the indicated 3/4" Screw (7) and the Access Door (95) from the left side of the Console Back (96). 2. Connect the wire on the receiver (A) to the indicated wire extending from the Console Back (96). Hold the receiver so the small cylinder is oriented as shown and is facing the Console Back. Attach the receiver to the plastic posts on the Access Door (95) with the two included small screws. Small Screws 96 95 Wire 3. Make sure that no wires are pinched. Reattach the Access Door (95) with the 3/4" Screw (7). Discard the other wires included with the receiver. A Small 7 Cylinder 9