NordicTrack 9800 Internationaltreadmill English Manual - Page 10

HOW TO CONNECT THE INCLINE TRAINER HOW TO CONNECT THE POWER CORD 2 This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. Note: These instructions describe how the power cord should be connected in the UK, Germany, Italy, Spain, or France. To connect the power cord in other countries, see the instruction sheet accompanying this manual. Germany France Spain GR FR/ UK Italy DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or service- IT UK man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product-if it will IT GR not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use an adapter to connect the plug to an improper receptacle. HOW TO CONNECT A CATV CABLE If your INCLINE TRAINER has the Workout TV con- sole, a CATV cable must be connected to the IN- This product is 1 CLINE TRAINER for cable TV stations to be viewed. for use on a dedi- cated circuit. In Locate the cable FR/SP the UK, jack on the front of Germany, Italy, Spain, or France, use a Cord the INCLINE IT TRAINER. Connect the CATV dedicated 10- Bracket Cord cable to the cable amp, 240-volt Screws Bracket jack using the PAL circuit. No other adapter. Route the Cable Jack appliance should cable so that it will be on the same not be pinched or circuit. The product is equipped with a cord having an crushed by the wheels when the incline is changed. GR equipment-grounding conductor and a grounding plug. Plug one end of the cord into the INCLINE TRAINER A satellite receiver, VCR, or DVD player can also be as shown in drawing 1. Attach the cord bracket over connected to the INCLINE TRAINER. Connect a CATV the cord with the included hex key and the two bracket cable from the coaxial output on your equipment (usu- screws. ally labeled TV OUT or RF OUT) to the cable jack on Next, plug the grounding plug into a receptacle as the front of the INCLINE TRAINER. shown in drawing 2 at the right. Do not modify the plug or the receptacle. Do not use an adapter or an extension cord. Note: Audio/video equipment without coaxial outputs JP (some satellite receivers and DVD players) requires a RF modulator to work correctly with the INCLINE TRAINER. RF modulators are not available from FreeMotion Fitness, but are available at electronics stores. See the owner's manual for the equipment you wish to connect to IT determine if an RF modulator is needed, or contact your local audio/visual service provider. 10