NordicTrack Asr 630 Elliptical User Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included hex keys and your own Phillips screwdriver wrench , and rubber mallet . , adjustable As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. Wave Washer Large Wave M8 Split M8 Washer (80)-2 Washer (89)-2 Washer (97)-16 (106)-2 M8 x 23mm Thin Washer (96)-2 M8 x 23mm Washer (31)-10 M10 Split Washer (99)-4 M8 Nylon Locknut (94)-2 M4 x 16mm Screw (78)-4 M4 x 16mm Round Head Screw (92)-19 M4 x 16mm Blunt Screw (33)-2 M8 x 19mm Patch Screw (86)-6 M8 x 23mm Shoulder Screw (105)-2 M8 x 14mm Patch Screw (84)-6 M8 x 45mm Button Screw (90)-6 M10 x 58mm Shoulder Bolt (104)-2 M10 x 80mm Button Screw (93)-4 1. See HOW TO FOLD AND UNFOLD THE ELLIPTICAL EXERCISER on page 12 and 1 unfold the elliptical exerciser. While another person lifts the front of the Frame (1), attach the Front Stabilizer (4) to the Frame with two M10 x 80mm Button Screws (93) and two M10 Split Washers (99). 99 93 1 4 5