NordicTrack C 700 Treadmill User Manual - Page 9

5. With the help of a second person, tip the treadmill onto its left side. Next, press in a Base Cap (87). Attach a Wheel (93) to the Base (29) with a 3/8" x 2 1/2" Bolt (7) and a 3/8" Nut (9). Do not overtighten the Nut; the Wheel must turn freely. Attach a Thick Base Pad (37) and a Thin Base Pad (92) to the Base (29) in the locations shown with four #8 x 3/4" Tek Screws (13). Be careful not to overtighten the Screws.  Hold the Right Upright (85) against the Base (29). Partially tighten three 3/8" x 4" Screws (3) with three 3/8" Star Washers (10) into the Right Upright and the Base; do not fully tighten the Screws yet. 5 7 85 92 13 93 9 3 10 87 37 13 29 6. With the help of a second person, position the treadmill so that the Base (29) is flat on the floor 6 as shown. Identify the Left and Right Base Covers (88, 89). 85 Slide the Left and Right Base Covers onto the Left and Right Uprights (84, 85) as shown. 84 89 88 29 9