NordicTrack C 9.5 Series Elliptical English Manual - Page 13

11. Orient the Right Pedal Arm (58) as shown, and then apply grease to the axle. 11 Attach the Right Pedal Arm (58) to the Right Roller Arm (59) with an M8 x 20mm Screw (79) and a Retainer (55); make sure that the flat 44 side (D) of the Retainer is facing the Right Roller Arm. Repeat this step for the Left Pedal Arm (44). 79 55 D 59 Grease 58 12. Apply grease to a Pedal Arm Axle (64). 12 While a second person holds the front end of the Right Pedal Arm (58) inside the bracket on the Right Upper Body Leg (60), insert the Pedal Arm Axle (64) into both parts from the direction shown. Next, slide an M8 x 22mm Washer (77) onto an M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64). Then, tighten the Pedal Arm Axle (64) and the M8 x 13mm Screw (82) at the same time. Repeat this step on the other side of the elliptical. 60 82 77 Grease 64 58 13