NordicTrack C 9.5 Series Elliptical English Manual - Page 18

How To Adjust The Positions Of - c 9 5 elliptical weight

Page 18 highlights

HOW TO MOVE THE ELLIPTICAL HOW TO LEVEL THE ELLIPTICAL Due to the size and weight of the elliptical, moving it requires two persons. Stand in front of the elliptical, hold the upright (A), and place one foot against one of the wheels (B). Pull on the upright and have a second person lift the handle (C) until the elliptical will roll on the wheels. Carefully move the elliptical to the desired location, and then lower it to the floor. If the elliptical rocks slightly on your floor during use, turn one or both of the leveling feet beneath the rear stabilizer (D) or turn the leveling foot under the center of the frame (E) until the rocking motion is eliminated. E D A HOW TO ADJUST THE POSITIONS OF THE PEDALS Each pedal can be adjusted to several positions. To adjust each pedal, simply pull the pedal B handle (F) outward, move the pedal to F the desired posi- tion, and then release the pedal handle into an adjustment hole beneath the pedal. Make sure to adjust both pedals to the same position. C 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

18
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, moving
it requires two persons.
Stand in front of the elliptical,
hold the upright (A), and place one foot against one of
the wheels (B). Pull on the upright and have a second
person lift the handle (C) until the elliptical will roll on
the wheels. Carefully move the elliptical to the desired
location, and then lower it to the floor.
HOW TO LEVEL THE ELLIPTICAL
If the elliptical rocks slightly on your floor during use,
turn one or both of the leveling feet beneath the rear
stabilizer (D) or turn the leveling foot under the center
of the frame (E) until the rocking motion is eliminated.
HOW TO ADJUST THE POSITIONS OF THE
PEDALS
Each pedal can be
adjusted to several
positions. To adjust
each pedal, simply
pull the pedal
handle (F) outward,
move the pedal to
the desired posi-
tion, and then
release the pedal
handle into an
adjustment hole
beneath the pedal.
Make sure to adjust both pedals to the same position.
A
C
B
D
E
F