NordicTrack C1600 Pro Treadmill English Manual - Page 21

To select a speed setting that includes a decimal- such as 3.5 mph-press two numbered buttons in succession. For example, to select a speed setting of 3.5 mph, press the 3 button and then immediately press the 5 button. Note: This will not function if the console is set to metric units. To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button. • The distance that you have walked or run • The number of vertical feet you have climbed • The speed of the walking belt • A track representing 1/4 mile (400 m) • Your pace in minutes per mile 4. Change the incline of the treadmill as desired. • Your current lap number To change the incline of the treadmill, press the Incline increase and decrease buttons or one of the numbered 1 Step Incline buttons. Each time you press one of the buttons, the incline will gradually change until it reaches the selected incline setting. • Your heart rate (see step 6) If desired, adjust the volume by pressing the volume increase and decrease buttons on the console. Note: The first time you adjust the incline, you must first calibrate the incline system (see step 4 on page 27). 5. Monitor your progress with the displays. To pause the workout, touch one of the menu buttons or press the Stop button on the console. To continue the workout, touch the Resume button or the Start button. To end the workout session, touch the End Workout button. The console offers several display modes. The display mode that you select will determine which workout information is shown. To select the desired display mode, simply flick or slide the screen. You can also view additional information by touching the red boxes on the screen. As you walk or run on the treadmill, the screen can show the following workout information: • The incline level of the treadmill • The elapsed time • The time left (Note: The manual mode does not have a time left countdown.) • The approximate number of calories you have burned • The approximate number of calories you are burning per hour 6. Measure your heart rate if desired. Note: If you use the handgrip heart rate monitor and the chest heart rate monitor at the same time, the console will not display your heart rate accurately. For information about the chest heart rate monitor, see page 16. Before using the handgrip heart rate monitor, remove the sheets of plastic from the metal contacts. In addition, make sure that your hands are clean. Contacts To measure your heart rate, stand on the foot rails and hold the contacts with your palms for approximately ten seconds; avoid moving your hands. When your pulse is detected, your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. 21