NordicTrack C1600 Pro Treadmill English Manual - Page 26

10. Enable or disable the key. HOW TO USE THE SOUND SYSTEM Note: This feature may not be enabled on your treadmill. You can disable the key so that the treadmill does not require the use of the key, if desired. Touch the Safety Key button. To disable the key, touch the Disable checkbox. CAUTION: Read the safety warning on the screen before disabling the key. To enable the key again, touch the Enable checkbox. 11. Enable or disable a passcode. The console features a child-safety passcode, designed to prevent unauthorized users from using the treadmill. Touch the Passcode button. To enable a passcode, touch the Enable checkbox. Then, enter a 4-digit passcode of your choice. Touch Save to use this passcode. Touch Cancel to return to the equipment settings mode and not use a passcode. To disable the passcode, touch the Disable checkbox. Note: If a passcode is enabled, the console will regularly ask for you to enter the passcode. The console will remain locked until the correct passcode is entered. IMPORTANT: If you forget your passcode, enter the following master passcode to unlock the console: 1985. To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your MP3 player, CD player, or other personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Next, press the play button on your personal audio player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your personal audio player. If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console. HOW TO USE THE INTERNET BROWSER Note: To use the browser, you must have access to a wireless network including an 802.11b/g/n router with SSID broadcast enabled (hidden networks are not supported). To open the browser, touch the globe button near the lower-left corner of the screen. Then, select a website. 12. Set a safety screen timeout. The console features an automatic screen reset; if no buttons are touched or pressed and the walking belt does not move for a set amount of time, the console will automatically reset. To set the amount of time the console will wait before it automatically resets, touch the Safety Screen Timeout button to view a list of times. Then, select the amount of time desired. Touch the back button on the screen. To navigate the Internet browser, touch the Back, Refresh, and Forward buttons on the screen. To exit the Internet browser, touch the Return button on the screen. To use the keyboard, see HOW TO USE THE TOUCH SCREEN on page 19. To enter a different web address in the URL bar, first, slide your finger down the screen to view the URL bar, if necessary. Then, touch the URL bar, use the keyboard to enter the address, and touch the Go button. 13. Exit the equipment settings mode. To exit the equipment settings mode, touch the back button on the screen. Note: While you are using the browser, the speed, incline, fan, and volume buttons will still function, but the workout buttons will not function. Note: If you have questions after following these instructions, go to support.iFit.com for assistance. 26