NordicTrack C300 Uk Manual - Page 14
Start all, six Screws, and then tighten them., Rotate the Covers at an angle as, you press them
View all NordicTrack C300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14. Attach the Pulse Crossbar (93) to the console assembly with six #8 x 1/2" Screws (1). Start all six Screws, and then tighten them. Firmly tighten the four 5/16" x 3/4" Screws (4). 14 Console Assembly 4 93 1 1 4 1 15. Check the gaps between the handrail assemblies (B, D) and the console assembly. If necessary, loosen the four #8 x 3/4" Screws (2) under the handrails. Next, slide the handrails as needed to adjust the alignment of the handrails and the console assembly. Then, retighten the Screws. 15 Console Assembly 87 Attach the Left Outside Upright Cover (87) and the Right Outside Upright Cover (96) to the Left and Right Uprights (89, 90) with two #8 x 3/4" Screws (2). Rotate the Covers at an angle as you press them against the Uprights. Do not overtighten the Screws. D 2 2 2 89 B 96 90 2 14