NordicTrack C300 Uk Manual - Page 17
Make sure that all parts are properly tightened before you use the treadmill.
View all NordicTrack C300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
20. Orient the Storage Latch (53) so that the decals are facing away from the treadmill as shown. Attach the lower end of the Storage Latch (53) to the bracket on the Base (94) with a 5/16" x 1 3/4" Bolt (6) and a 5/16" Nut (12). Raise the Storage Latch (53) to a vertical position. If there is a tie (G) and a spacer (H) in the top of the Latch, remove and discard them. 20 G Decals H Large Barrel 53 21. Attach the upper end of the Storage Latch (53) to the bracket on the Latch Crossbar (38) with a 5/16" x 2 1/4" Bolt (3) and a 5/16" Nut (12). Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 28). 21 56 12 94 6 12 38 3 53 22. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 30 and 31). Note: Extra parts may be included. 17