NordicTrack C3000 Treadmill Uk Manual - Page 10

Aged When The Power Is Turned On.

Page 10 highlights

8. With the help of a second person, hold the handrail assembly near the Right Upright (78) and the Left Upright (74). Connect the Upright Wire (38) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Connect the Upright AV Cable (116) in the Left Upright (74) to the 30" AV Cable (118). Remove the wire tie from the Upright Wire (38). 8 118 116 74 Console Wire 38 Handrail Assembly 38 Console Wire Wire Tie 78 9. Set the handrail assembly on the Uprights (74, 78). Be careful not to pinch any wires. Attach the handrail assembly to the Uprights (74, 78) with six 5/16" x 1 1/4" Bolts (7) and six 5/16" Star Washers (10) as shown. See assembly steps 5 and 7. Firmly tighten the 3/8" x 4 1/4" Bolts (6). 9 10 7 10 74 Handrail Assembly 77 10 10 7 78 10. With the help of a second person, hold the console assembly near the handrail assembly. 10 Connect the five wires from the console assembly to the five wires from the handrail assembly. Console Assembly See the inset drawing in step 8. The connec- tors should slide together easily and snap into place. If they do not, turn one connector Wires and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CON- SOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Wires Handrail Assembly 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

10
8.
With the help of a second person, hold the
handrail assembly near the Right Upright (78)
and the Left Upright (74). Connect the Upright
Wire (38) to the console wire.
See the inset
drawing. The connectors should slide to-
gether easily and snap into place.
If they do
not, turn one connector and try again.
IF THE
CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Connect the Upright AV Cable (116) in the Left
Upright (74) to the 30" AV Cable (118).
Remove the wire tie from the Upright Wire (38).
9.
Set the handrail assembly on the Uprights (74,
78).
Be careful not to pinch any wires.
Attach the handrail assembly to the Uprights
(74, 78) with six 5/16" x 1 1/4" Bolts (7) and six
5/16" Star Washers (10) as shown.
See assembly steps 5 and 7. Firmly tighten
the 3/8" x 4 1/4" Bolts (6).
10. With the help of a second person, hold the con-
sole assembly near the handrail assembly.
Connect the five wires from the console assem-
bly to the five wires from the handrail assembly.
See the inset drawing in step 8. The connec-
tors should slide together easily and snap
into place.
If they do not, turn one connector
and try again.
IF THE CONNECTORS ARE
NOT CONNECTED PROPERLY, THE CON-
SOLE MAY BE DAMAGED WHEN THE
POWER IS TURNED ON.
78
74
118
116
Console
Wire
Wire Tie
8
7
10
74
Handrail
Assembly
9
Handrail
Assembly
Console
Assembly
10
38
Console
Wire
Handrail
Assembly
38
78
7
7
7
10
10
10
Wires
Wires