NordicTrack C3000 Treadmill Uk Manual - Page 25
The Information Mode
View all NordicTrack C3000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
THE INFORMATION MODE The console features an information mode that allows you to view treadmill usage information and select a system of measurement for the console. The information mode also allows you to adjust the settings of the television and to save channels into the television's memory. Follow the steps below to use the information mode. 1. Hold down the Stop button while inserting the key into the console. Adjust the settings, if desired, by pressing the Volume buttons. 3. Press the Stop button again and add or delete channels. To add or delete a channel, first press the Channel buttons until the desired channel number appears on the screen. Then, press the Volume increase button to add the channel, or the Volume decrease button to delete the channel. Continue this process until you have added all desired channels and deleted all unwanted channels. When you select the information mode, the lower part of the screen will show the total number of hours that the treadmill has been used (Time) and the total number of kilometers or miles that the walking belt has moved (Distance). In addition, the center of the display will show the word "Metric" for metric kilometers or the word "English" for English miles. Press the Speed increase button to change the unit of measurement if desired. 2. Press the Stop button and adjust the brightness, contrast, color, sharpness, and/or hue of the television. When you press the Stop button, the brightness level indicator will appear on the television screen. Press the Volume buttons to adjust the brightness setting if desired. 4. Press the Stop button again and select a signal source. In order to view channels, you must select the correct signal source. Press the channel increase button to select the PAL BG, PAL I, PAL DK, PAL DK CHINA, SECAM L, or SECAM LL source; try all six sources, if necessary, to find the optimal source. Note: If you are in France, first try one of the SECAM sources. If you are in the United Kingdom, first try the PAL I source. If you are in any other country, first try the PAL BG source. If the picture from the first signal source is not clear, try the other five sources. 5. When you are finished using the information mode, remove the key. To exit the information mode at any time, remove the key from the console. Next, press the Channel buttons until the contrast, color, sharpness, or hue level indicator appears. 25