NordicTrack C990 Treadmill English Manual - Page 29

 Units-The selected unit of measurement will appear in the matrix. To change the unit of measurement, press the Enter button. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. Default Menu-The default menu will appear when you insert the key into the console or when you press the Home button. Press the Enter button repeatedly to select the manual main screen or the iFit screen as the default menu. Firmware Update-For the best results, regularly check for firmware updates. The WiFi-Advanced option will allow you to set up a wireless network connection using your computer, smart phone, tablet, or other Wi-Fi device. See step 6 on page 30 for instructions. Connect to iFit Account-To set up a different iFit account, but maintain the existing wireless connection, follow the instructions in the matrix. Note: This option will rarely be used.  Clear WiFi Setting-To erase the console's wireless network settings and have it forget the currently selected wireless network, follow the instructions in the matrix. Note: The matrix will display NOT CONNECTED if the console is not connected to a wireless network. Press the Enter button to check for firmware updates using your wireless network. If an update is available, the update will begin automatically.  Contrast-To adjust the contrast level of the display, press the Incline increase and decrease buttons. 4. Use WiFi-Normal to set up a wireless connection. IMPORTANT: To avoid damaging the treadmill, do not turn off the power while the firmware is being updated. The update may take several minutes. Note: Occasionally, a firmware update may cause your console to function slightly differently. These updates are always designed to improve your exercise experience. This option will allow you to set up a wireless network connection using the console. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password. To set up a wireless network connection using the console, first press the Enter button. Default Settings-To restore the console to its factory default settings, press the Enter button. Note: The console will erase any information that you have saved in its memory. IP Address-Displays the console's IP Address. The WiFi-Normal option will allow you to set up a wireless network connection using the console. See step 4 on page 29 for instructions. Next, set the included WiFi setup card on the console. The buttons on the WiFi setup card are referenced in the following instructions. Card 29