NordicTrack Cx995 Elliptical English Manual - Page 5
Assembly
View all NordicTrack Cx995 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , two adjustable wrenches , a rubber mallet , and pliers . As you assemble the elliptical exerciser, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on pages 28 and 29. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it is pre-assembled. M6 Washer M10 Split (64)-2 Washer (73)-2 M10 Washer (126)-2 7.6mm Spacer (109)-2 M8 Jam Nut (86)-6 M4 x 12mm Round Head Screw (96)-1 M4 x 16mm M6 x 16mm Patch M8 x 54mm Button Screw (83)-4 Screw (98)-4 Screw (76)-4 M8 x 41mm Button Bolt (85)-4 M8 x 44mm Button Screw (84)-8 M10 x 78mm Bolt Set (65)-2 M8 x 38mm Button Bolt (105)-2 M10 x 108mm Button Screw (70)-2 1. Identify the Front Stabilizer (8). While another person lifts the front of the Frame (1) and holds the Pedal 1 Legs (4, 5) in the position shown, attach the Front 1 Stabilizer to the Frame with four M8 x 44mm Button 4, 5 Screws (84) and a Support Plate (104). While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (not shown) to the Frame in the same way. 8 104 84 84 5