NordicTrack E 8.5 Elliptical Uk Manual - Page 12

12. Identify the Short Pedal Arm Axles (115) and the Long Pedal Axles (not shown). Apply a small amount of grease to a Short Pedal Arm Axle (115) and to an M8 x 23mm x 1.5mm Washer (91). Next, tighten an M8 x 16mm Screw (102) and an M8 x 23mm x 1.5mm Washer (91) a few turns into one end of the Short Pedal Arm Axle (115). Orient a Pedal Arm (12) as shown. While a second person holds the front end of the Right Pivot Arm (51) inside the bracket on the Pedal Arm, insert the Short Pedal Arm Axle (115) through both parts. Tighten another M8 x 16mm Screw (102) and an M8 x 23mm x 1.5mm Washer (91) a few turns into the Short Pedal Arm Axle (115). Then, tighten both Screws at the same time. Repeat this step on the other side of the elliptical. 12 102 91 Grease 115 51 12 91 102 13. Identify the Right Pedal (14) and orient it as shown. 13 Attach the Right Pedal (14) to the right Pedal Arm (12) with three M8 x 50mm Screws (112). Attach the Left Pedal (not shown) to the left Pedal Arm (12) in the same way. 14 12 12 112 12