NordicTrack E14 Instruction Manual - Page 29

7. Calibrate the incline system. 3. Enable Wi-Fi. To calibrate the incline system, touch Maintenance, touch Calibrate Incline, and then touch Begin. The ramp will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. When the incline system is calibrated, touch Finish. IMPORTANT: Keep pets, feet, and other objects away from the elliptical while the incline system is calibrating. 8. Exit the settings main menu. Make sure that Wi-Fi® is enabled. If it is not enabled, touch the Wi-Fi toggle to enable it. 4. Set up and manage a wireless network connection. When Wi-Fi is enabled, the screen will show a list of available networks. Note: It may take a few moments for the list of wireless networks to appear. Note: You must have your own wireless network and an 802.11b/g/n router with SSID broadcast enabled (hidden networks are not supported). If you are in a settings menu, touch the back button. Then, touch the close button (x symbol) to exit the settings main menu. When a list of networks appears, touch the desired network. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password. HOW TO CONNECT TO A WIRELESS NETWORK To use iFit workouts and to use several other features of the console, the console must be connected to a wireless network. 1. Select the main menu. First, turn on the power (see HOW TO TURN ON THE POWER on page 21.) Note: It may take a few moments for the console to be ready for use. Next, select the main menu. When you turn on the console, the main menu will appear on the screen after the console boots up. If you are in a workout, touch the screen, touch Pause, touch End, and then touch Finish to return to the main menu. Follow the prompts on the screen to enter your password and connect to the selected wireless network. (To use the keyboard, see HOW TO USE THE TOUCH SCREEN on page 21.) When the console is connected to your wireless network, a checkmark will appear next to the wireless network name. If you are having problems connecting to an encrypted network, make sure that your password is correct. Note: Passwords are case-sensitive. Note: The console supports unsecured and secured (WEP, WPA™, and WPA2™) encryption. A broadband connection is recommended; performance depends on connection speed. 2. Select the wireless network menu. Touch the Wi-Fi button (wireless symbol) at the bottom of the screen to select the wireless network menu. Note: If you have questions after following these instructions, go to support.iFit.com for assistance. 5. Exit the wireless network menu. To exit the wireless network menu, touch the back button (arrow symbol). 29