NordicTrack E7 Instruction Manual - Page 11
Attach the Water Bottle Holder 37 to
View all NordicTrack E7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
12. Attach the Water Bottle Holder (37) to the Upright (4) with two M4 x 16mm Screws (104). 12 4 104 37 104 13. While a second person holds the Console (7) near the Upright (4), connect the console wire to the Upper Wire Harness (110). Then, connect the console pulse wires to the Pulse Wires (115). Insert the excess wire downward into the Upright (4). Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 16mm Screws (104). See step 3. Tighten the M8 x 19mm Patch Screws (82). 13 7 Pulse Wires Avoid pinching the wires Console Wire 110 4 115 104 14. To use the power adapter and the plug adapter, see HOW TO PLUG IN THE POWER ADAPTER on page 12. Make sure that all parts are properly tightened before you use the elliptical. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the elliptical to protect the floor. 11