NordicTrack Elite 16.9 Elliptical English Manual - Page 16

HOW TO CONNECT THE DIGITAL TV Before operating the digital TV, you must connect an antenna or a 75 ohm CATV cable to the 75 ohm terminal, an AV cable to the audio/video input jack, or an HDMI cable to the HDMI input jack. Note: Use a CATV cable to connect to an external source such as a cable box, satellite TV box, VCR, or analog cable. No CATV cable, antenna, or adapter; AV cable; or HDMI cable is included. HOW TO CONNECT AN ANTENNA Place an indoor VHF antenna or Indoor an outdoor com- VHF bination VHF/ Antenna UHF antenna in the desired loca- tion. Note: Outdoor antennas are subject to weather- ing that can reduce signal quality. Inspect your out- door antenna and the lead-in wiring before connecting the antenna. Outdoor Combination VHF/UHF Antenna 2. Push the 300 ohm to 75 ohm adapter onto the 75 ohm terminal on the fitness equipment frame near the power cord. 300 to 75 Ohm Adapter 75 Ohm Terminal Note: Due to an FCC requirement, analog signals are no longer broadcast over the air in the United States as of June 12, 2009. If you wish to view television signals through an antenna, you must have an antenna capable of receiving digital signals. Cable television has not been affected. 75 Ohm CATV Cable 1. Connect the 75 ohm CATV cable from the antenna to the 75 ohm terminal on the fitness equipment frame near the power cord. 300 Ohm Flat Wire 1. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter. 75 Ohm CATV Cable 75 Ohm Terminal Screwdriver 300 Ohm Flat Wire HOW TO CONNECT AN EXTERNAL SOURCE USING A CATV CABLE 1. Connect one end of a 75 ohm CATV cable to the 75 ohm output jack on your external source. 2. Plug in the power cord of your external source. See your external source user's manual for proper grounding instructions. 3. Connect the 75 ohm CATV cable to the 75 ohm terminal on the fitness equipment frame near the power cord. See the drawing at the left. 300 to 75 Ohm Adapter 16