NordicTrack Elite 2900 Treadmill User Manual - Page 10
ceiver so the small cylinder is oriented as shown.
View all NordicTrack Elite 2900 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
If you purchase the optional chest pulse sensor (see page 24), follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated Screw (13) and the Access Door (70) from the bottom of the Console Base (65). 2. Connect the wire on the receiver (A) to the indicated wire extending from the Console Base (65). Hold the receiver so the small cylinder is oriented as shown. Attach the receiver to the plastic posts on the Access Door (70) with the two included small screws. 3. Make sure that no wires are pinched. Reattach the Access Door (70) with the Screw (13). The other wires included with the receiver may be discarded. 65 Wire A Small Cylinder Small Screws 13 70 10