NordicTrack Elite 2900 Treadmill User Manual - Page 9

Press the Latch Sleeve 96 into the Left Upright 73. If

Get NordicTrack Elite 2900 Treadmill PDF manuals and user guides View all NordicTrack Elite 2900 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

8. Press the Latch Sleeve (96) into the Left Upright (73). If 8 necessary, use a rubber mallet to fully insert the Sleeve. Remove the knob from the pin. Make sure that the collar and the spring are on the pin. Next, insert the pin into the Latch Sleeve (96) and the Left Upright (69), and tighten the knob back onto the pin. Knob 96 Spring 73 9. Place the treadmill in the storage position (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 25). 9 Center the Frame (48) between the Uprights (73, 74). 48 Tighten the Upright Bolts (72) in the lower ends of the Uprights (73, 74). 73 Collar Pin 74 72 72 10. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrench in a secure place; the allen wrench is used to adjust the walking belt (see page 28). To protect the floor or carpet, place a mat under the treadmill. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
9
Collar
Spring
96
73
Knob
Pin
8.
Press the Latch Sleeve (96) into the Left Upright (73). If
necessary, use a rubber mallet to fully insert the Sleeve.
Remove the knob from the pin.
Make sure that the collar
and the spring are on the pin.
Next, insert the pin into
the Latch Sleeve (96) and the Left Upright (69), and
tighten the knob back onto the pin.
8
9.
Place the treadmill in the storage position (see HOW TO
FOLD THE TREADMILL FOR STORAGE on page 25).
Center the Frame (48) between the Uprights (73, 74).
Tighten the Upright Bolts (72) in the lower ends of the
Uprights (73, 74).
73
9
74
48
72
72
10.
Make sure that all parts are properly tightened before you use the treadmill.
Note: Extra hardware may
be included. Keep the included allen wrench in a secure place; the allen wrench is used to adjust the walking
belt (see page 28). To protect the floor or carpet, place a mat under the treadmill.