NordicTrack Elite 9500 Pro Treadmill User Manual - Page 7

2. Pull the Upright Wire (84) and the Base Ground Wire (94) through the indicated hole in the Base 2 (97). Attach the Base Ground Wire (94) to the Base (97) with a #8 x 1/2" Ground Screw (9). Hole 84 3. Identify the Left Upright (89), which is marked 3 with a "Left" sticker. Have a second person hold the Left Upright near the Base (97). See the inset drawing. Tie the wire tie in the Left Upright (89) securely around the end of the Upright Wire (84). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Left Upright. 89 94 9 97 84 89 Wire Tie Wire Tie 84 84 97 4. Hold the Left Upright (89) against the Base (97). Be careful not to pinch the wires. If necessary, position the Base Ground Wire (94) in the hole in the side of the Left Upright. Insert two 3/8" x 2 3/4" Bolts (7) and two 3/8" x 1 1/4" Bolts (8) with two 3/8" Star Washers (12) into the Left Upright. Partially tighten the 3/8" x 2 3/4" Bolts (7) and the 3/8" x 1 1/4" Bolts (8) until the heads of the Bolts touch the Left Upright (89); do not fully tighten the Bolts yet. Note: It may be helpful to use the Short Hex Key (63) on the Bolt shown. Attach the Right Upright (not shown) in the same way. Note: There are no wires on the right side. 4 89 7 12 94 8 12 7 63 97