NordicTrack Elite 9500 Pro Treadmill User Manual - Page 9
May Become Damaged When You Turn - console
View all NordicTrack Elite 9500 Pro Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Remove the four 3/8" x 1" Bolts (2) from the Uprights (89, 90). Orient each Handrail Bracket (85) so that the long tab is in the position shown and the large holes are on top. Route the Upright Wire (84) through the center hole in the Handrail Bracket. Attach each Handrail Bracket (85) with the two 3/8" x 1" Bolts (2) and two 3/8" Star Washers (12). Start all four Bolts, and then tighten each of them. 7 Long Tab 84 Long Tab Large 2 Holes 12 85 89 2 12 85 90 8. With the help of a second person, hold the 8 handrail assembly near the Left Upright (89). Connect the Upright Wire (84) to the Handrail Wire (86). See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. 86 84 Handrail Assembly 86 84 Wire Tie 89 9