NordicTrack Elliptical E7.5 User Manual - Page 11
Tip: Avoid damaging the Pivot Axle Cover
View all NordicTrack Elliptical E7.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Apply grease to a Link Arm Axle (94) and to an M17 x 27mm Wave Washer (88). First, insert the Link Arm Axle (94) into the Right Upper Body Leg (6) from the side shown. Next, slide the M17 x 27mm Wave Washer (88) onto the Link Arm Axle. Then, insert the Link Arm Axle into the Right Link Arm (90). Insert a hex key into the M8 x 25mm Screw (128) in the Link Arm Axle (94). Using a second hex key, tighten another M8 x 25mm Screw (128), a Pivot Axle Cover (111), and an M8 x 25mm x 1.5mm Washer (126) into the other end of the Link Arm Axle (94). Tip: Avoid damaging the Pivot Axle Cover when tightening the Screw. Repeat this step on the other side of the elliptical. 10 7 91 128 94 Grease 6 88 90 126 111 128 11. Tighten the six M8 x 45mm Bolts (104) and the eight M8 x 16mm Screws (102). 11 Press the Top Cover (23) into the Right and Left Frame Covers (21, 22). 104 104 23 102 102 21, 22 11