NordicTrack Elliptical E7.5 User Manual - Page 7
Tip: To prevent the Upright Wire 60
View all NordicTrack Elliptical E7.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Orient the Front Stabilizer (3) as shown. 2 While a second person lifts the front of the Frame (1), attach the Front Stabilizer (3) with two M10 x 120mm Screws (100). 3 100 1 3. Identify and orient the Upright (5) and the Top Cover (23) as shown. Slide the Top Cover (23) upward onto the Upright (5). Have a second person hold the Upright (5) and the Top Cover (23) near the Frame (1). Locate the wire tie in the Upright (5). Tie the lower end of the wire tie to the Upright Wire (60). Next, pull the upper end of the wire tie until the Upright Wire is routed through the Upright. Tip: To prevent the Upright Wire (60) from falling into the Upright (5), secure the Upright Wire with the wire tie. Tip: Avoid pinching the Upright Wire (60). Slide the Upright (5) onto the Frame (1). Attach the Upright (5) with eight M8 x 16mm Screws (102) and eight M8 Split Washers (131) (only four of each are shown); do not tighten the Screws yet. Do not press the Top Cover (23) into place yet. 3 Wire Tie 102 131 102 131 Avoid pinching the Upright Wire (60) 5 23 Wire Tie 60 1 131 102 7