NordicTrack Gx 3.1 Bike Uk Manual - Page 6

ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tool(s): one Phillips screwdriver one adjustable wrench one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.iconsupport.eu on your computer and register your product. 1 Registration provides the following benefits: • activates your product manufacturer's warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call CUSTOMER CARE (see the front cover of this manual) to register your product. 2. Attach the Rear Stabilizer (3) to the Frame (1) with two M10 x 95mm Screws (76). 2 3 1 76 6