NordicTrack Gx 4.6 Bike Uk Manual - Page 5
Assembly
View all NordicTrack Gx 4.6 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.iconsupport.eu on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Service (see the front cover of this manual) and register your product. 2. If there is a shipping insert (not shown) in the front of the Frame (1), remove and discard it. 2 Identify the Front Stabilizer (2). Attach the Front Stabilizer to the Frame (1) with two M8 x 58mm Screws (13), two M8 Split Washers (14), and two M8 Curved Washers (15). 2 15 14 1 13 5