NordicTrack Incline Trainer X3 Treadmill User Manual - Page 10
Aged When The Power Is Turned On.
View all NordicTrack Incline Trainer X3 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Slide the Accessory Tray (86) onto the Yoke (88). Partially insert the two indicated tabs and 7 then partially insert the other tabs. Then, fully in- sert all of the tabs. Make sure not to break the tabs. Attach the Accessory Tray (86) to the Yoke (88) with four #8 x 3/4" Screws (1). Start all four Screws before tightening any of them. Do not overtighten the Screws. 86 Tabs 88 1 1 8. Have a second person hold the Console (84) near the Yoke (88). Connect the Upright Wire 8 (72), the Left and Right Pulse Wires (70, 71), and the Console Ground Wire (89) to the wires extending from the Console. See the inset drawing. The connectors should slide to- gether easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAM- AGED WHEN THE POWER IS TURNED ON. Insert the excess wire into the Console (84). 84 88 89 70 Console 71 Wires 72 Console Wire 72 10