NordicTrack Incline Trainer X3 Treadmill User Manual - Page 11
floor or carpet from damage, place a mat under the incline trainer.
View all NordicTrack Incline Trainer X3 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9. Attach the Console (84) to the plate on the Yoke (88) with four #8 x 3/4" Screws (1). Be careful 9 not to pinch any wires. Start all four Screws before tightening any of them. Do not over- tighten the Screws. 10. Tighten the 3/8" x 5" Bolts (7). 10 Attach the Console Cover (73) to the top of the Upright (74) with two #8 x 1/2" Cover Screws (92). Do not overtighten the Cover Screws. 84 88 1 1 92 73 7 74 11. Make sure that all parts are properly tightened before you use the incline trainer. Keep the included hex keys in a secure place. A hex key is used to adjust the walking belt (see pages 22 and 23). To protect the floor or carpet from damage, place a mat under the incline trainer. 11
11
10
92
74
73
10.
Tighten the 3/8" x 5" Bolts (7).
Attach the Console Cover (73) to the top of the
Upright (74) with two #8 x 1/2" Cover Screws
(92).
Do not overtighten the Cover Screws.
11.
Make sure that all parts are properly tightened before you use the incline trainer.
Keep the included hex
keys in a secure place. A hex key is used to adjust the walking belt (see pages 22 and 23).
To protect the
floor or carpet from damage, place a mat under the incline trainer.
7
9.
Attach the Console (84) to the plate on the Yoke
(88) with four #8 x 3/4" Screws (1).
Be careful
not to pinch any wires. Start all four Screws
before tightening any of them. Do not over-
tighten the Screws.
9
1
1
88
84