NordicTrack Incline Trainer X7i Treadmill English Manual - Page 24

6. Use WiFi–-Advanced to set up a wireless connection. This option will allow you to set up a wireless network connection using your computer, smart phone, tablet, or other Wi-Fi device. HOW TO USE THE STEREO SOUND SYSTEM To play music or audio books through the console’'s stereo speakers, you must connect your MP3 player, CD player, or other personal audio player to the console through the MP3 jack. On your computer, smart phone, tablet, or other Wi-Fi device, open the list of available networks to which your device can connect. One of the options will be IFIT_SETUP; select this network. If this network does not appear, make sure that your Wi-Fi device is within range of the console, and then close and re-open your list of networks. Also, see Clear WiFi Setting on page 23 and clear any previous wireless network settings on the console. Note: The network IFIT_SETUP will not appear if the console has already been configured to connect to a wireless network. Also, AndroidTM devices may not be able to detect IFIT_SETUP. To use the MP3 jack, plug your audio wire into the MP3 jack on the console. Then, plug your audio wire into a jack on your MP3 player, CD player, or other personal audio player. Make sure that your audio wire is fully inserted. Next, press the play button on your MP3 player, CD player, or other personal audio player. Adjust the volume on your personal audio player or press the volume increase and decrease buttons on the console. Increase Decrease The console will display an IP address, such as 192.168.0.1:8080. Open a web browser on your computer, smart phone, tablet, or other Wi-Fi device. Next, type in the IP address on the console into the URL bar in your browser. Example: http://192.168.0.1:8080. If you are using a personal CD player and the CD skips, set the CD player on the oor or another at surface instead of on the console. Your browser will load a web page. If the web page does not appear, double-check the IP address and the previous instructions of this step. Follow the instructions on the web page to connect the incline trainer to your wireless network. Note: A warning may appear stating that the server cannot be identified. If this happens, make sure that you have entered the IP address correctly. If you cannot complete any part of this process, or if you have any questions, go to support.iFit.com for assistance. 7. Exit the settings mode. To exit the settings mode, remove the key from the console. 24