NordicTrack Netl10819 Instruction Manual - Page 27
How To Use The Sound System With An
View all NordicTrack Netl10819 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Note: You must have your own wireless network and an 802.11b/g/n router with SSID broadcast enabled (hidden networks are not supported). When a list of networks appears, touch the desired network. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password. An information box will ask if you want to connect to the wireless network. Touch the Connect button to connect to the network or touch the Cancel button to return to the list of networks. If the network has a password, touch the password entry box. A keyboard will appear on the screen. To view the password as you type it, touch the Show Password checkbox. To use the keyboard, see HOW TO USE THE TOUCH SCREEN on page 19. When the console is connected to your wireless network, a checkmark will appear next to the wireless network name. Then, touch the back button on the screen to return to the wireless network mode. To disconnect from a wireless network, touch and hold the name of the wireless network, and then touch the Forget Network button. HOW TO USE THE SOUND SYSTEM WITH A BLUETOOTH DEVICE 1. Place or hold your Bluetooth-enabled device near the console. 2. Turn on your device's Bluetooth setting. 3. Pair your device to the console. Press and hold the Bluetooth button on the console's speaker grill for 3 seconds. The Bluetooth speakers will enter pairing mode. When your device and the console pair successfully, the audio from your device will play through the console's speakers. Note: The console can save eight devices in its memory. If you have previously paired your device to the console, you can simply press the Bluetooth button to connect your device to the console. 4. Erase the console's device memory if necessary. If you need to erase all the Bluetooth-enabled devices saved in the console's memory, press and hold the Bluetooth button for 10 seconds. If you are having problems connecting to an encrypted network, make sure that your password is correct. Note: Passwords are case-sensitive. Note: The console supports unsecured and secured (WEP, WPA™, and WPA2™) encryption. A broadband connection is recommended; performance depends on connection speed. Note: If you have questions after following these instructions, go to support.iFit.com for assistance. 5. Exit the wireless network mode. To exit the wireless network mode, touch the back button on the screen. HOW TO USE THE SOUND SYSTEM WITH AN AUDIO CABLE To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Next, press the play button on your personal audio player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your personal audio player. 27