NordicTrack Spacesaver Se5i Elliptical English Manual - Page 6
Assembly
View all NordicTrack Spacesaver Se5i Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Assembly requires only the included tool(s). • Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to my.nordictrack.com on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have internet access, call Customer Care (see the front cover of this manual) and register your product. 2. If there is a shipping support attached to the rear of the Frame (1), remove the screws from the 2 shipping support, and discard the screws and the shipping support. With the help of another person, place some packing inserts from the packing material under the rear of the Frame (1) so that the Frame is lifted off the floor. Have another person hold the elliptical to prevent it from moving from side to side until this step is completed. Orient the Rear Stabilizer (70) as shown. Attach the Rear Stabilizer to the Frame (1) with two 70 M10 x 120mm Screws (84). Then, remove the packing inserts and lower the Rear Stabilizer (70). 1 84 6