NordicTrack T 14.0 Instruction Manual - Page 19

HOW TO SET UP THE CONSOLE Before using the treadmill for the first time, set up the console. 1. Connect to your wireless network.  Note: In order to access the internet, download iFit workouts, and use several other features of the console, you must be connected to a wireless network. See HOW TO USE THE WIRELESS NETWORK MODE on page 30 to connect the console to your wireless network. 2. Check for firmware updates. First, see step 1 on page 26 and step 2 on page 26 and select the maintenance mode. Then, see step 3 on page 29 and check for firmware updates. 3. Calibrate the incline system.  See step 4 on page 29 and calibrate the incline system of the treadmill. The console is now ready for you to begin working out. The following pages explain the various workouts and other features that the console offers. To use the manual mode, see this page. To use an onboard workout, see page 22. To use a set-a-goal workout, see page 24. To use an iFit workout, see page 25. To use the equipment settings mode, see page 26. To use the sound system, see page 27. To use the internet browser, see page 28. To use the maintenance mode, see page 29. To use the wireless network mode, see page 30. IMPORTANT: If there are sheets of plastic on the console, remove the plastic. To prevent damage to the walking platform, wear clean athletic shoes while using the treadmill. The first time you use the treadmill, observe the alignment of the walking belt, and center the walking belt if necessary (see page 35). 4. Create an iFit account.  Touch the globe button near the lower-left corner of the screen and touch the iFit button.  The browser will open to the iFit.com home page. Follow the prompts on the website to sign up for your iFit membership. Note: For information about navigating in the browser, see page 28. 19