NordicTrack T14.2 Treadmill English Manual - Page 12

11. W ith the help of a second person, hold the console assembly near the Handrails (79) (only one 11 is shown). Connect the ground wire from the console assembly to the Ground Wire (80) on the Pulse Crossbar (81). Connect the Upright Wire (91) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Console Assembly Ground Wire 80 91 Console Wire 91 81 Wire Tie Console Wire 79 12. S et the console assembly on the Handrails (79). Make sure that no wires are pinched. Insert 12 the excess Upright Wire (91) behind the Console Frame (101). Attach the console assembly to the brackets on the Handrails (79) with the four 5/16" x 5/8" Screws (11) that you removed earlier. Do not tighten the Screws yet. 79 11 Console Assembly 101 91 79 11 12