NordicTrack T8.0 Treadmill Uk Manual - Page 8
Be careful not to pinch the wires., do not fully tighten the Screws, Attach the Right Upright
View all NordicTrack T8.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Hold the Left Upright (75) against the Base 4 (80). Be careful not to pinch the wires. Insert a 3/8" x 4" Screw (4) with a 3/8" Star Washer (5) into the top hole in the Left Upright. Insert the 3/8" x 4" Screw (4) partially through the Left Upright (75). Next, slide a Screw Spacer (93) onto the end of the Screw. Then, tighten the Screw partially into the Base (80). Partially tighten two more 3/8" x 4" Screws (4) with two 3/8" Star Washers (5) into the Left Upright (75); do not fully tighten the Screws yet. Attach the Right Upright (not shown) in the same way. Note: There are no wires on the right side. 5. Set the Console Base (83) face down on a soft 5 surface to avoid scratching the Console Base. Remove the two Screws (A) from the Console Frame (87). Remove the Console Frame. Discard the Screws. 75 4 93 5 5 Wires 80 83 A A 87 8