NordicTrack Viewpoint 3600 Treadmill English Manual - Page 7

Assembly

Get NordicTrack Viewpoint 3600 Treadmill PDF manuals and user guides View all NordicTrack Viewpoint 3600 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex key and your own Phillips screwdriver mallet , and adjustable wrench . , rubber Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra hardware may be included. 3/8" Nut (20)-2 #8 x 3/4" Screw (7)-6 Base Extension Nut (91)-4 #8 x 1" Tek Screw (82)-8 5/16" Star Washer (75)-4 3/8" Star Washer (67)-4 #8 x 2 1/4" Screw (63)-4 3/8" x 1 1/4" Bolt (72)-4 3/8" x 1 3/4" Bolt (106)-2 5/16" x 2" Bolt (87)-4 1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its side as shown. Partially fold the Frame (55) so that the treadmill is more stable. Do not fully fold the Frame until the treadmill is completely assembled. Orient a Base Extension (97) so that the Base Foot (81) is on the side shown. Insert the Base Extension into the indicated bracket on the base of the Uprights (85). If necessary, use a rubber mallet to align the holes in the Base Extension with the holes in the bracket. Attach the Base Extension (97) with two 5/16" x 2" Bolts (87), two 5/16" Star Washers (75), and two Base Extension Nuts (91) as shown. Firmly tighten the Bolts. 1 Bracket 85 87 75 91 97 81 55 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
ASSEMBLY
Assembly requires two persons.
Set the treadmill in a cleared area and remove all packing materials.
Do not
dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex key
and your own Phillips screwdriver
, rubber
mallet
, and adjustable wrench
.
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check to see if it is preattached
to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-
bly. Extra hardware may be included.
7
1.
Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its side as shown. Partially
fold the Frame (55) so that the treadmill is more
stable.
Do not fully fold the Frame until the
treadmill is completely assembled.
Orient a Base Extension (97) so that the Base
Foot (81) is on the side shown. Insert the Base
Extension into the indicated bracket on the base
of the Uprights (85). If necessary, use a rubber
mallet to align the holes in the Base Extension
with the holes in the bracket.
Attach the Base Extension (97) with two 5/16" x
2" Bolts (87), two 5/16" Star Washers (75), and
two Base Extension Nuts (91) as shown.
Firmly
tighten the Bolts.
#8 x 3/4"
Screw (7)–6
5/16" x 2" Bolt
(87)–4
Base Extension
Nut (91)–4
3/8" Nut (20)–2
#8 x 2 1/4" Screw (63)–4
3/8" Star
Washer (67)–4
5/16" Star
Washer (75)–4
#8 x 1"
Tek Screw (82)–8
3/8" x 1 1/4" Bolt (72)–4
3/8" x 1 3/4" Bolt (106)–2
85
Bracket
81
55
87
91
1
75
97