NordicTrack Vr25 Instruction Manual - Page 10

start all the Screws, and then tighten them.

Get NordicTrack Vr25 PDF manuals and user guides View all NordicTrack Vr25 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

10. Tip: Avoid pinching the wires. Attach the Console (4) to the Handlebar (7) with four M4 x 16mm Screws (77); start all the Screws, and then tighten them. 10 4 7 77 Avoid pinching the wires 11. Attach the Upright Cover (57) to the Handlebar (7) with two M4 x 16mm Screws (77). 11 7 57 77 12. Attach the Seat Handlebar (10) to the Seat Carriage (41) with four M8 x 38mm Screws (67); 12 start all the Screws, and then tighten them. 10 Next, locate the wire (C) on the seat assembly. See the inset drawing. Rotate the connector on the wire (C) so that the "V"-shaped indentation (D) is at the bottom. Plug the wire (C) fully into the Frame Pulse C Receptacle (42) on the left side of the exercise bike. 42 C D 10 67 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
10
10
4
77
7
Avoid pinching
the wires
10.
Tip: Avoid pinching the wires.
Attach the
Console (4) to the Handlebar (7) with four
M4 x 16mm Screws (77);
start all the Screws,
and then tighten them.
11. Attach the Upright Cover (57) to the Handlebar
(7) with two M4 x 16mm Screws (77).
11
57
7
77
12
41
42
C
10
67
12. Attach the Seat Handlebar (10) to the Seat
Carriage (41) with four M8 x 38mm Screws (67);
start all the Screws, and then tighten them.
Next, locate the wire (C) on the seat assembly.
See the inset drawing.
Rotate the connector on
the wire (C) so that the “V”-shaped indentation
(D) is at the bottom.
Plug the wire (C) fully into the Frame Pulse
Receptacle (42) on the left side of the exercise
bike.
C
D